If one ink cartridge is removed, the Brother machine will automatically begin cleaning. Gently push the scanner cover support down.Į. Lift the scanner cover to release the lock. Push the white plastic hook towards the cartridge to verify it is fully latched over the top edge of the cartridge. Press down firmly on the top of the cartridge until it is fully seated. Put the ink cartridge(s) back in its designated position. Install each color in its designated position. Reinstall the ink cartridges in the order indicated by the Brother machine's LCD. Pull the white plastic hooklocked over the edge of the ink cartridgestoward you. Open the Scanner Cover by lifting from the right-hand side of the Brother machine until it locks securely into the open position. The Brother limited warranty does not apply to any problem that was caused by the use of third party ink and/or cartridges.Ī. Using non-Brother supplies may affect the hardware performance, print quality, and machine reliability since the ink formulation in genuine Brother ink cartridges prevent smearing and clogging of the print head. Verify the ink cartridges are installed correctly:īrother strongly recommends that customers do not use generic ink or refill their Brother ink cartridges. If the Print Quality Check Sheet has any missing dashes or colors on any of the four color blocks, go to STEP 2.Ģ. If the Print Quality Check Sheet looks OK, the problem may be related to the scanner. Press the UP OR DOWN ARROW key to select Print Quality. Press the UP OR DOWN ARROW key to select Test Print.ĭ. Print a Print Quality Test Sheet to test the print head:ī. If the copies you make on your Brother machine are blank, you must determine if the problem is related to the print head or the scanner.ġ.
0 Comments
Leave a Reply. |